The ST600 is a feature-rich vehicle tracking device equipped with a cellular modem which enables the device to deliver high speed communication functionality as well as compatibility with the 3G network. The ST600 uses 2G networks when 3G is not available. The ST600 not only transfers more data in the same amount of time to its server but also gets wider coverage than that of ordinary GPS device.

Get Sample

3G Network
Free Mounting DPA
(Driver Pattern Analysis)
Crash Reconstruction (optional)
Maintenance Server Supported (optional)

- Operation on the 3G Network
- Multiple 14-pin I/O's
- Built-in 3-axis Accelerometer
- Free Mounting DPA (Driver Pattern Analysis) functionality
- Crash Reconstruction (optional)
- Maintenance Server Supported (optional)
- Jamming Detection
- Circular / Poligonal / Route deviation Geofence
- OTA Configurable and Firmware Upgradable via GPRS

Vehicle Tracker 3G
Specification ST600
Network Frequency 3G: 850/1900 MHz
2G: 850/1900 MHz
Network Frequency (Optional) 3G: 900 / 2100 Mhz
2G: 9900 / 1800 MHz
Transmission Protocol TCP / UDP
Setting Mode by USB cable or GPRS or SMS
GPRS Multi-slot Class 12
AT Command GSM 07.07, 07.05
Command /
Report sent via SMS
Back-up Server Supported (via dual IP)
GPS/Glonass Sensitivity Tracking        -162 dBm
Reacquisition -160 dBm
Cold start      -148 dBm
Event Inputs 1 Ignition 
3 Inputs : Available for Panic button, Door sensor
Event Outputs 1 output : Vehicle Blocking
1 output : Open drain output up to 300mA, Available for Siren
1-Wire interface 1-Wire (I-button, Temperature sensor)
1 Serial Port General RS232 , RFID Reader(RS232 type)
Audio Interface Optional external Speaker & Mic
Housing Dimension 90.5(W) × 58(L) × 26(T) mm
Weight 100g (with back-up battery)
Power Supply DC 8 V ~ 33 V, Main power +/- inversion protection
Power Consumption Active mode                  : 70~80mA @12V
Typical (3min. reporting)  : 40~50 mA @12V
Sleep mode                   : Approx. 2mA @12V
Motion Detection Built-in 3-axis accelerometer
Back-up Battery Rechargeable 3.7V,  Ni-MH 450mAh
Electric Protection Protection against ESD and overvoltage
Operational Temperature Range -30˚C ~ +80˚C
Certificates CE, FCC, PTCRB, RoHS

We can provide highly customizable devices. Based on the functions available on the device, more functions can also be optionally available to meet specific needs of the users requiring customization. In addition to the basic functions of the standard version, some of functions can be included as optional items.

ST600R (RS232) ST600V ST600M/MD+ST20M (OBD/ELD)

For any further information, please contact our sales representative.